WAPP is offering Automation Solutions in the area of water and energy management in the form of standalone Smart Controllers. They can be utilised for specific applications as well as for complete integrated solutions.

They could take the form of Project Automation, Building Automation Systems or Industrial Automation.
 
 
 
The different types of solutions are given below:
 
COOLING TOWER CONTROLLER

• Fan Control with Dynamic Set Point
• Optimum Approach based on Weather Conditions/Heat Load
• Auto Blow Down
• Pump Control to Minimize Energy Consumption (applicable to non-chiller operations in industries like Power, etc)
• Optimum Parameter Monitoring

Extra Features:

• Monitoring of CoC
• Energy Load/ton of refrigeration
• Chiller Water temperature optimisation for further energy saving
• Benchmarking
• Auto Sequencing
• Fault Detection

 
PUMP CONTROLLER
WAPP offers Smart Controllers that provide optimisation solutions to save energy. Smart Controllers consist of a skid-mounted system with a control, flow meters, pressure transmitters, etc. Smart Controllers will provide a Dynamic Efficiency of the system for various applications in both Open Loop and Closed Loop Systems, as well as plot the system curve. If the application demands, the system will also comprise Variable Frequency Drives and Pre-programmed Variable Set Points as in-built features.

• Primary Energy Monitoring
• Peak Flow Monitoring (total flow, flow vs time vs energy graph)
• Dynamic Set Points for Pumps to meet Peak Demand
• Detection and Minimising System Leakages, water or/and energy
• Centralised Control through GPRS for wide application areas
• Centralised Control through Ethernet/Wire line in case of a building
• Alarm system for Pump or Motor failure
• Benchmarking/Auto Sequencing

 
CHILLER/CONDENSER CONTROLLER

• Delta T
• Delta P
• Flow monitoring
• To optimise energy
• Scaling/descaling etc

WATER MANAGEMENT INSTRUMENTATION

• Flow Meters/Transmitters
• Level Sensors/Transmitters
• PH/ORP Meters/Transmitters
• Pressure Transmitters
• Temperature Transmitters
• DO Sensors/Transmitters
• TDS Sensors/Transmitters
• Turbidity Sensors/Transmitters
• Hardness/Conductivity Sensors/Transmitters
• Sludge Level Detectors/Transmitters
• Energy Meters

WAPP’s Smart Controllers are all designed in such a way that can seamless integrated into a Building Management System. In other words, all crucial parameters can be relayed from specific equipment to a centralised control room. Connectivity can be through both wireless and wire line access, depending on the building layout.

• Distributed Control System With In-Built Flash Program To Enable Independent Operation.
• Multiple Control and Data Acquisition through Common Controllers.
• Multiple Media To Control and Acquire Data Over RS-485 Standards and/or GPRS Network.
• Customized and Tailor Made For Customer Specific Application.

INDUSTRIAL AUTOMATION
WAPP’s experience in the water and energy segments has helped the company develop numerous industrial automation solutions. WAPP conducts water and energy audits and provides consultancy on how to optimise their consumption.
At the same time, WAPP offers turnkey solutions in the form of installations of Smart Controllers for specific applications. These include Cooling Tower solutions, Pumping Solutions, HVAC solutions and many other water-related and energy-related functions.  All aimed to save both water and energy.